What does code P1172 mean on Volkswagen vehicles?
The ECU detects a voltage signal from throttle potentiometer 2 that is lower than specification.
OBD-II Code Volkswagen
P1172 — Volkswagen — Throttle Actuation Potentiometer Signal 2 Too Low
The ECU detects a voltage signal from throttle potentiometer 2 that is lower than specification.
Common symptoms
- Limp mode activation
- unresponsive accelerator pedal
Possible causes
- Damaged throttle potentiometer
- short to ground
- wiring fault
Initial recommendation
Inspect throttle actuator and wiring, test potentiometer signal.
Safety notice
This information is for guidance only. Brand-specific codes may vary by model, year, engine, transmission and vehicle configuration. It does not replace a physical inspection or diagnosis by a qualified mechanic. If the vehicle is unsafe to operate, avoid driving it and seek professional inspection.
Analyze this code with MecaOBD
Use the app to combine Volkswagen code P1172 with your vehicle's actual symptoms for more complete diagnostic guidance.
Go to the app View more brands